SHEET LIFTER

SHEET LIFTERS are an important part of the Loose leaf system.. Sheet lifters (sometimes referred to as " sheet savers") extend the life of a catalog by lifting the loose sheets when you close your binder. If the sheets "Hang UP", the sheet lifter takes the abuse and thus saves the lead sheets which are often the table of contents or other important information. Without sheet lifters when a binder is closed, if the sheets jam in the hinge, it places unusual force on the hinge. This causes premature splitting of the cover. The sheet lifters will save the lead sheets from excessive wear. They will help prevent the holes from tearing.
The use of sheet lifters makes closing a binder quicker with less effort & thinking.

D RING- Because D rings are mounted on the back cover of binders it becomes more important that one sheet lifter is used.
Without that one lifter the sheets will surely bind when closing.
Placement is in front of the sheets so it will fully lay across the spine and be a few inches into the inside front cover.

 

 The different styles of sheet lifters are intended for different sizes, ring shapes or in some cases economic.

1- Boomerang… Allow pages to lie flat—prevents bunching. Makes it easier to turn pages, especially in large capacity or frequently used binders. Holes fit any style three-ring binders. Their boomerang shape gives the maximum page-turning power at a lower price.

2- Curved… An economic tool which provides lifting capabilities and sheet protection at the most inexpensive cost. These sheet lifters are subject to cracking in larger capacity binders with prolonged use. They do however give reasonably good service with moderate usage. In use, the outside curve should point toward the sheets. One curved sheet lifter is needed on each side of the sheets. They are sold in pairs.

3- Flat Poly… The poly sheet lifter give years of trouble-free service. The 3" works effective in 1" to 3" capacity binders. The 5" lifter particularly useful on "D" Ring binders. "D" Ring binders should only use one sheet lifter thus the reason they are sold singularly. A "D" Ring or Slant "D" Ring is mounted to the back cover. If a second sheet lifter were to be used it would always remain on the cover and never move. This would render it useless.

   
  1 2 3  
 
11"

STYLE

PART NUMBER

DESCRIPTION

FOR SHEET SIZE

SIZE

STD. PRICED PER

CURVED

SLC-1120-3W

For 1/2" to 1-1/2" Capacity small curved plastic 3 hole-white

11"

11"

2"

PAIR

CURVED

SLC-1125-3W

For 1" to 2" Capacity small curved plastic 3 hole-white

11"

11"

2-1/2"

PAIR

POLY FLATS

SLP-1103-3CL

For 3/4" to 2" Capacity "D" rings milk clear 47 gauge poly. 3 holes. 3"wide heavy duty.

11"

11"

3"

EACH

POLY FLATS

SLP-1105-3CL

For 1" to 3" Capacity "D" rings milk clear 47 gauge poly. 3 holes. 5"wide heavy duty.

11"

11"

5"

EACH

POLY FLATS

SLP-1185-3CL

For 1" to 3" Capacity "D" rings milk clear 47 gauge poly. 3 holes. 8-1/2" wide heavy duty.

11"

11"

8-1/2"

EACH

BOOMERANG

SLB-1006-3W

For 1" to 4" Capacity white 55 gauge poly 2 hole 6" wide.

11"

11"

6"

EACH

 
 
 
8-1/2"

STYLE

PART NUMBER

DESCRIPTION

FOR SHEET SIZE

SIZE

STD. PRICED PER

3" POLY FLAT

SLP-8503-3CL

For 3/4" to 1-1/2" Capacity "D" rings 3" Wide poly 47 gauge 3 hole. milk clear.

8-1/2"

8-1/2"

3"

EACH

5" POLY FLAT

SLP-8505-5CL

For 1" to 3" Capacity "D" rings 5" Wide poly 47 gauge 3 hole. milk clear.

8-1/2"

8-1/2"

5"

EACH

 
 
 
9-1/2"

STYLE

PART NUMBER

DESCRIPTION

FOR SHEET SIZE

SIZE

STD. PRICED PER

3" POLY FLAT

SLP-9503-3CL

For 1" to 1-1/2" Capacity "D" rings 5" Wide poly 47 gauge 3 hole. milk clear.

8-1/2"

8-1/2"

3"

EACH

5" POLY FLAT

SLP-9505-5CL

For 1" to 2-1/2" Capacity "D" rings  molded plastic. 3 hole.

8-1/2"

8-1/2"

5"

EACH

 
 
BACK TO MECHANISM INFORMATION
Vinyl Products| Poly products| Paper Products| Index Tabs | Vacuum Formed products | Turned Edge Products | Menu Covers Products | CBS Online Store | Guide Lines for Art Work| Contact Us | Home
© Copyright 2009 Continental Binder & Specialty Corp.  All rights reserved